Only The Best Projector Lamps

Dlp Projector Power Consumption

Rambus Demonstrates Superior Power Efficiency of World's Fastest Memory

Rambus Inc., one of the world's premier technology licensing companies specializing in high-speed memory architectures, today showcased a silicon demonstration of a complete XDR memory system running at data rates up to 7.2Gbps with superior power efficiency. This silicon demonstration consists of Elpida's recently-announced 1Gb XDR DRAM device and an XIO memory controller transmitting realistic data patterns. The XIO memory controller is up to 3.5 times more power efficient than a GDDR5 controller, and the total memory system can provide up to two times more bandwidth than GDDR5 at equivalent power. In addition, the XIO memory controller demonstrated bi-modal operation with support for both XDR DRAM as well as next-generation XDR2 DRAM.

"Future graphics and multi-core processors require significantly higher memory performance under extremely challenging power and thermal constraints," said Martin Scott, senior vice president of Research and Technology Development at Rambus. "This technology demonstration highlights the outstanding power efficiency of the XDR and XDR2 memory architectures at performance levels from 3.2 to 7.2Gbps with scalability to well over 10Gbps."

This silicon demonstration, shown at Denali MemCon 2009 in San Jose, is the first implementation supporting the XDR memory architecture roadmap incorporating innovations developed as part of Rambus' Terabyte Bandwidth Initiative. Implemented in the bi-modal XIO memory controller for XDR2 operation, these innovations include:

• Fully Differential Memory Architecture (FDMA) - enhances signal integrity and increases performance through point-to-point differential signaling of clock, data, and command/address (C/A), an industry first;
• FlexLink C/A - reduces pin count and increases scalability; and
• Enhanced FlexPhase - enables the world's highest memory signaling rates while simplifying routing and board design.

In addition, t
he XDR2 memory architecture includes:

• Micro-threading of the DRAM core - introduced by Rambus in early 2005, increases data transfer efficiency and reduces power consumption; and
• 16X Data Rate - allows for extremely high data rates with the use of a relatively low-speed system clock.

Built on these innovations, an XDR2 memory system can provide memory bandwidths of over 500 GB/s to an SoC. A single 4Byte-wide, 9.6 Gbps XDR2 DRAM device can deliver up to 38.4 GB/s of peak bandwidth, and the XDR2 architecture supports a roadmap to device bandwidths of over 50 GB/s.
With these capabilities, the XDR and XDR2 memory architectures are scalable across a broad range of performance appropriate for multi-core computing, graphics, gaming, and consumer electronics. The XDR memory architecture has already been adopted in products including the Sony PLAYSTATION 3 computer entertainment system, DLP projectors, Teradici PC-over-IP computing systems, and Toshiba's Qosmio laptop PCs and HDTV chip sets.

 

About the Author

http://reviews-mann.blogspot.com/2010/02/final-fantasy-xiii-preview.html

http://www.google.com/profiles/mannzunty

http://twitter.com/lizareckon

Acer X1261 DLP XGA Projector

Here are a few Dlp Projector Power Consumption listings you might enjoy:

Twisted nematic field effect

History

RCA research

In 1962, Richard Williams, a physical chemist working at RCA Laboratories, started looking for new physical phenomenon that might lead to a display technology not involving vacuum tubes. Aware of the long line of research involving nematic liquid crystals, he started experimenting with the compound p-azoxyanisole. This had a melting point of 116 F, so Williams set up his experiments on a heated microscope stage, placing samples between transparent tin-oxide electrodes on glass plates held at 125 F. He found that if a very strong electrical field were applied across the stack, striped patterns would form that were later termed "Williams domains". The required field was about 1,000 volts per centimeter, far too high for a practical device, and realizing that development would be lengthy he turned the research over to physicist George Heilmeier and moved on to other work.

In 1964, RCA Heilmeier, Louis Zanoni and chemist Lucian Barton discovered that certain liquid crystals could be switched between a transparent state and a highly scattering opaque one with the application of electrical current. The scattering was primarily forward, into the crystal, as opposed to backscattering towards the light source. By placing a reflector on the far side of the crystal, the incident light could be turned on or off electrically, creating what Heilmeier dubbed dynamic scattering. In 1965 had Joseph Castellano and Joel Goldmacher, organic chemists, try to find crystals that remained in the fluid state at room temperature. Within six months they had found a number of candidates, and with further development RCA was able to announce the first liquid crystal displays in 1968.

Although successful, the dynamic scattering display required constant current flow through the device, as well as relatively high voltages. This made them unattractive for low-power situations, where many of these sorts of displays were being used. Not being self-lit, LCDs also required external lighting if they were going to be used in low-light situations, which made existing display technologies even more attractive in overall power terms. A further limitation was the requirement for a mirror, which limited the viewing angles. The RCA team was aware of these limitations, and continued development of a variety of technologies.

One of these potential effects had been discovered by Heilmeier in 1964. He was able to get organic dyes to attach themselves to the liquid crystals, and they would stay in position when pulled into alignment by an external field. When switched from one alignment to the other, the dye was shown or hidden, switching between two colored states. Called the guest-host effect, work on this approach stopped when the dynamic scattering effect had been demonstrated successfully.

TN-effect

Another potential approach was the twisted-nematic approach, which had first been noticed by French physicist Charles-Victor Mauguin in 1911. Mauguin was experimenting with a variety of semi-solid liquid crystals when he noted that he could align the crystals by pulling a piece of paper across them, which caused the crystals to become polarized. He later noticed that if he sandwiched the crystal between two aligned polarizers, he could twist them in relation to each other, but the light continued to be transmitted. This was not expected; normally if two polarizers are aligned at right angles, light will not flow through them. Mauguin concluded that the light was being re-polarized by the liquid crystal, twisted along with the crystal itself.

Wolfgang Helfrich, a physicist who joined RCA in 1967, became interested in Mauguin's twisted structure and thought it might be used to create an electronic display. RCA showed little interest, because they felt that any effect that used two polarizers would also have a large amount of light absorption and thus have to be brightly lit. In 1970, Helfrich left RCA and joined the Central Research Laboratories of Hoffmann-LaRoche in Switzerland, where he teamed up with Martin Schadt, a solid-state physicist. Schadt built a sample with electrodes and a twisted version of a liquid-crystal material called PEBAB (p-ethoxybenzylidene-p'-aminobenzonitrile), which Helfrich had reported in prior studies at RCA, as part of their guest-host experiments. When voltage is applied, PEBAB aligns itself along the field, which breaks the twisting structure, stops redirecting the polarization, and makes the cell turn opaque.

Patent battle

At this time Brown, Boveri & Cie (BBC) was also working with the devices, as part of a prior joint medical research agreement with Hoffmann-LaRoche. BBC demonstrated their work to a physicist from the US who was associated with James Fergason at the Westinghouse Research Laboratories. Fergason was an expert in liquid crystals and was working on the TN-effect for displays, having formed ILIXCO to commercialize developments of the research being carried out in conjunction with Sardari Arora and Alfred Saupe at Kent State University's Liquid Crystal Institute.

When news of the demonstration reached Hoffmann-LaRoche, Helfrich and Schadt immediately pushed for a patent, which was filed on 4 December 1970. Their formal results were published in Applied Physics Letters in 15 February 1971. In order to demonstrate the feasibility of the new effect for displays, Schadt fabricated a 4-digit display panel in 1972. This is believed to be the first, fully-functional twisted-nematic LCD ever made.

Fergason published a similar patent in the US on either 9 February 1971 or 22 April 1971. This was two months after the Swiss patent was filed and set the stage for a three-year legal confrontation that was settled out of court. In the end, all the parties received a share of what would become many millions of dollars in royalties.

Commercial development

PEBAB was subject to breakdown in when exposed to water or alkalines, and required special manufacturing to avoid contamination. In 1972 a team led by George Gray developed a new type of cyanobiphenyls that could be mixed with PEBAB to produce less reactive materials. These additives also made the resulting liquid less viscous, thereby providing faster response times, while at the same time making them more transparent and producing a pure-white color display.

This work, in turn, led to the discovery of an entirely different class of nematic crystals, the cyanophenylcyclohexanes. Discovered by Ludwig Pohl, Rudolf Eidenschink and their colleagues at Merck KGaA in Darmstadt, they quickly became the basis of almost all LCDs, and remain a major part of Merck's business today.

Description

The twisted nematic effect is based on the precisely controlled realignment of liquid crystal molecules between different ordered molecular configurations under the action of an applied electric field. This is achieved with little power consumption and at low operating voltages.

Exploded view of a TN liquid crystal cell showing the states in an off state(left), and in an on state with voltage applied(right)

The illustrations to the right show both the OFF and the ON-state of a single picture element (pixel) of a twisted nematic light modulator. A twisted configuration of nematic liquid crystal molecules is formed between two glass plates, G, which are separated by several spacers and coated with transparent electrodes, E1, E2. The electrodes themselves are coated with alignment layers (not shown) that precisely twist the liquid crystal by 90 when no external field is present (left diagram). When light shines on the front of the LCD, light with the proper polarization (about half) will pass through the first polarizer and into the crystal, where it is rotated by the helical structure. The light is then properly polarized to pass through the second polarizer, set at 90 to the first. The light then passes through the back of the cell, which thus looks transparent.

When a field is applied between the two electrodes, the crystal re-aligns itself with the external field (right diagram). This "breaks" the careful twist in the crystal and fails to re-orient the polarized light passing through the crystal. In this case the light is blocked by the rear polarizer, and the cell becomes opaque. The amount of opacity can be controlled by varying the voltage; at voltages near the threshold only some of the crystals will re-align, and the display will be partially transparent, but as the voltage is increased more and more of the crystals will re-align until it becomes completely "switched". A voltage of about 1 V is required to make the crystal align itself with the field, and no current passes through the crystal itself. Thus the electrical power required for that action is very low.

To display information with a twisted nematic liquid crystal, the transparent electrodes are structured by photo-lithography to form a matrix or other pattern of electrodes. Only one of the electrodes has to be patterned in this way, the other can remain continuous (common electrode). For low information content numerical and alpha-numerical TN-LCDs, like digital watches or calculators, segmented electrodes are sufficient. If more complex data or graphics information have to be displayed, a matrix arrangement of electrodes is used. Obviously, addressing of matrix displays, such as in LCD-screens for computer-monitors or flat television screens, is more complex than with segmented electrodes. These matrix LCDs necessitate integration of additional non-linear electronic elements into each picture element of the display (e.g. thin-film diodes, TFDs, or thin-film transistors, TFTs) in order to allow the addressing of individual picture elements without crosstalk (unintended activation of non-addressed pixels).

See also

Display examples

References

^ a b c d e f g Joseph Castellano, "Modifying Light', American Scientist, September-October 2006

^ a b "Twisted Nematic Liquid Crystal Displays (TN-LCDs), an invention from Basel with global effects", Information, No. 118, October 2005

^ George Gray, Stephen Kelly: "Liquid crystals for twisted nematic display devices", Journal of Materials Chemistry, 1999, 9, 20372050

^ "Merck Annual Report, 2004"

M. Schadt: "Milestones in the History of Field-Effect Liquid Crystal Displays and Materials", Jpn. J. Appl. Phys. 48(2009), pp. 1-9

Martin Schadt, personal communication, 2006/2007

Further reading

Joseph A. Castellano: Liquid Gold - The Story of Liquid Crystal Displays and the Creation of an Industry, World Scientific Publishing, 2005

Peer Kirsch, "100 years of Liquid Crystals at Merck: The history of the future.", 20th International Liquid Crystals Conference, July 2004

David A. Dunmur and Horst Stegemeyer: "Crystals that Flow: Classic papers from the history of liquid crystals", Compiled with translation and commentary by Timothy J. Sluckin (Taylor and Francis 2004), ISBN 0-415-25789-1, History of Liquid Crystals Homepage

Werner Becker (editor): "100 Years of Commercial Liquid-Crystal Materials", Information Display, Volume 20, 2004

Gerhard H. Buntz (Patent Attorney, European Patent Attorney, Physicist, Basel), "Twisted Nematic Liquid Crystal Displays (TN-LCDs), an invention from Basel with global effects", Information No. 118, October 2005, issued by Internationale Treuhand AG, Basel, Geneva, Zurich. Published in German

Rolf Bucher: "Wie Schweizer Firmen aus dem Flssigkristall-Rennen fielen", Das Schicksal von Roche und BBC-Entwicklungen in zehn Abschnitten", Neue Zrcher Zeitung, Nr.141 56 / B12, 20.06.2005

v  d  e

Display technology

Video

Current generation

Electroluminescent display (ELD)  Vacuum fluorescent display (VFD)  Light emitting diode (LED) display  Cathode ray tube (CRT)  Liquid crystal display (LCD) (TFT  LED backlight)  Plasma display panel (PDP)  3LCD  Digital Light Processing (DLP)  Liquid crystal on silicon (LCOS)

Next generation

Organic light-emitting diode (OLED) (roll-up display  Active-matrix  Phosphorous)  Surface-conduction electron-emitter display (SED)  Field emission display (FED)  Laser TV  Ferro Liquid display (FLD)  Interferometric modulator display (IMOD)  Thick-film dielectric electroluminescent (TDEL)  Nanocrystal display  Quantum dot display (QDLED)  Time-multiplexed optical shutter (TMOS)  Telescopic pixel display (TPD)  Liquid crystal lasers (LCL)  Laser Phosphor Display (LPD)

Non-video

Electromechanical (Flip-dot  Split-flap  Vane)  Electronic paper  Rollable  Eggcrate  Nixie tube

3D display

Stereoscopic  Autostereoscopic  Computer generated holography  Volumetric  Laser beam

Static media

Hologram  Movie projector  Neon sign  Rollsign  Slide projector  Transparency

Related articles

Display examples  Free-space display  Large-screen television technology  Optimum HDTV viewing distance  High dynamic range imaging (HDRI)

Comparison of display technology

Categories: Liquid crystals | Liquid crystal displays
About the Author

I am China Product writer, reports some information about lint remover , skirt hangers.

Below are a few more great Dlp Projector Power Consumption deals on Amazon:

TI reveals new, teensy projector chip
The new nHD model of the Pico DLP line has better optical performance and lower power consumption, Texas Instruments says. Originally posted at Deep Tech